Technical data

– Min./max. foot cone angle: 15° / 55°
– Pitch circle diameter: 152 mm
– Max. tooth height with 21° finished broach head: 10.7 mm
– Max. tooth width at tooth root with 21°: 28 mm
– Broach head diameter: 200 mm
– Number of teeth range: 8–50
– Max. broach head diameter: .21"

Workpiece spindle

– Diameter of the tapered bore at the wide end: 99.219 mm
– Clamping length at 304.8 mm: 15.478 mm
– Taper depth: 15.875 mm
– Diameter of the entire spindle bore: 22.225 mm
Maximum tooth height: 14.8 mm
Maximum tooth width at the root: 28 mm
Maximum root angle: 55°
Minimum root angle: 15°
Milling head speed: 32.6-49.7 m/min
Feed speeds (seconds per tooth): 2-3.1
Index range: 8-50 mm
Diameter of taper bore at large end: 99 mm
Taper per foot: 15.4 mm
Depth of taper: 15.8 mm
Countersink behind the taper: 57.2 x 77.9 mm
Diameter of the bore through the spindle: 22.3 mm
Power of the main drive motor: 10 HP
Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm
Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm
Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm
Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm
Footprint (L x W): 320 x 221 cm
Total weight of the 726 REVACYCLE machine: approx. 9 t