TThe INDEX ABC machine is a compact lathe for short turned parts made from bar
stock.
It has an inclined bed design with two independent turrets.
The top turret is primarily intended for internal machining and
machining, while the lower turret is used for external machining.
The turret arrangement enables collision-safe working and simple programming
programming with high tool availability.
The large free space in the working area enables a favourable chip fall
The work area consists of two turrets:
Turret 1
- Disc turret with 7 radially arranged tool holders Ø 25 mm DIN
69880 and a holder for the reinforced synchronised spindle on the turret station
8. tools with 1 holders can also be used with an equalising holder can also be
used. The turret is prepared for the V-ledge system.
- Synchronised spindle for rear end machining, simultaneous parallel machining
with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and
external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter
(external) 75 mm.
- Back-boring device.
Starting from the centre of the working spindle in clockwise direction, 3
stationary back-boring tools are back boring tools are arranged. These are
located in the pitch circle of the
synchronised spindle. The back machining is carried out simultaneously with the
machining on the the working spindle. Two additional tools can also be used,
can be equipped with a tool feed drive.
Revolver 2
- Turret with 6 symmetrical dovetail holders and each station with 2 locating
holes for cylindrical shank per station.
The following tool systems can be used.
- stationary tools that can be moved in the Z direction
- Driven tools with cylindrical shank Ø25 (can be used in two positions per
station)
can be used)
- including bar loader LM 3200 -
+ various accessories (various Ø guide half-shells/tool holders)
Technical data:
- Material bar diameter: (Ø 25 / Ø 36 / Ø 52)-
--> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm
--> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm
--> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm
--> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm
--> bar length max. 3200 mm
--> from bars Ø 25 mm, min. 2,500 mm
--> up to rods Ø 25 mm, min. 1,500 mm
--> bar support = approx. 300 = 6 bars Ø 52 mm
Mass (bar loader) = 700 kg
